A-frame Chalkboard

3 Oddball Tricks for Sharpening Hedge Trimmer Blades

Sharpening hedge trimmer blades is something that many folks will not need to do very regularly - in the end, that is not a piece of gear that you will use frequently and for long periods of time. Nevertheless, knowing the best way to sharpen the blades your-self will help save you lots of money and time when it comes time to get it done. Getting this done with a professional, notably during their busier times of the entire year, place your equipment out of action for days and can be expensive.

But how do you tell when your hedge trimmer blades need to be sharpened? The easiest way to do this is when you have cut them to test out your hedges and crops. If the leaves seem ragged or ripped, then your blades have gotten dull plus they will have to be sharpened.

You will need to make sure you are wearing the correct safety gear whenever performing care as hedge trimmers are hazardous items of equipment. Thick work gloves and safety goggles are satisfactory for sharpening the blades. It is also important to keep in mind to never work on your own hedge trimmer whilst it's hot - wait for the motor to be fully cool. The blades can be removed by undoing the bolts keeping it in place.

There are two ways to sharpen your hedge trimmer blades - mechanically, using a rotary tool, or manually, with a metal file. The processes, nevertheless, are pretty similar. When employing a rotary instrument:

Add a conical point into the top of your rotary instrument and tighten
Switch the rotary tool on so it mirrors the angle of the cutting teeth on the trimmer, which will be generally about 45 degrees, and angle the stage
Run the rotary tool along equally cutting surfaces on each tooth, employing a steady pressure
When using a steel file (about 7 inches in length):

Move the file over the cutting surface on each tooth; go on to another tooth, when clear, new steel is shown
flip the blades over and repeat on the underside cutting teeth
You must always apply a thin coat of oil after sharpening to ensure your hedge trimmers are working at their optimum. Them bolt back in the trimmer's framework and also you're good to go.

If you enjoyed this write-up and you would certainly like to get even more information concerning frame Chalkboard (www.youtube.com) kindly see our own web page.