A-frame Chalkboard

Three Questions and Answers to Sharpening Hedge Trimmer Blades

Hedge trimmer blades is some thing that many people will not have to do very regularly - in the end, that is not a piece of gear that you will use for long periods and frequently. However, knowing how to sharpen the blades of your hedge trimmer yourself in regards time to get it done will save you money and a great deal of time. Getting this done by a professional, notably during their more active times of the year, place your equipment out of action for days and could be costly.

But how do you tell when your hedge trimmer blades need to be sharpened? The best way to do that is to check out your hedges and crops once you have cut them. If the leaves ripped or appear ragged, then your blades are becoming dull and they will need to be sharpened.

You'll want to ensure you're wearing the proper safety gear whenever performing maintenance, as hedge trimmers are harmful bits of equipment. For sharpening the blades, safety goggles and thick work gloves are satisfactory. It is also very important to remember to never work in your hedge trimmer whilst it's not cold - wait for the motor to be completely cool. The blades are easily removed by undoing the bolts keeping it in place.

The procedures, however, are pretty similar. When using a rotary device:

Add a point that is abrasive to the head of your rotary instrument and tighten
Switch the rotary device on and angle the stage to ensure that it reflects the angle of the cutting teeth on the trimmer, which will be generally about 45 degrees
Run the rotary instrument along both reducing surfaces on each tooth, employing a pressure that is constant
When using a metal file (about 7" in length):

place the trimmer blades on a level surface with all the ends hanging over the edge
Transfer the file over the cutting area on every tooth; go on to the next tooth when clear, new steel is revealed
flip the blades over and repeat on the bottom cutting teeth
You must always apply a thin coating of oil after sharpening to make sure your hedge trimmers are working at their ideal. To replace the blades, simply bolt them back in the frame of the trimmer and you're all set.

If you cherished this article and you simply would like to acquire more info relating to frame Chalkboard (youtube.com) i implore you to visit the web-site.